Testing Equipment Electrical for Pipe
|Min. Order:||1 Set/Sets|
|Packaging:||one set one unit ,carton packing|
|Place of Origin:||China|
Model No.: GT102
Recently, the domestic testing equipment with the widest range of diameters and the highest detection accuracy of metal tubes for on-line automatic detection has passed the identification
InThe successful development of this equipment has broken the monopoly of non-destructive testing equipment for metal pipes abroad, and the equipment price of the same indicator is only half of the imported equipment, and the advantages of substituting for import are obvious. Its application can boost the domestic metal pipe to the high-end market. The attention and welcome of major domestic steel companies.
The plugging of sewage pipes is a problem that is easily encountered in daily life, leaving many people with an unusual headache. The correct way to clear the sewer is very important, knowing that this can do more with less. You can buy a borescope to inspect the pipe first instead of the worker go into the pipe.
The general sewer dredge refers to the clogging of sewers in daily life, including the toilets, floor drains, sinks, sinks and other sewers. Some of these pipes are inadvertently dropped into foreign objects during installation or are blocked due to installation errors. In some cases, fouling occurs during the use of pipes, making the inner diameter of pipes thinner so as to affect normal discharge. In the above two situations, it is generally easy to dispose of by using a pipe dredging machine to directly dredge or to use pipes to clear particles. If you enter cement during the renovation process, it will be very difficult to clear. There are very few people who can deal with it effectively, so the cost is very high.
First of all, it is necessary to identify the main reasons for the blockage, rather than blindly clearing, because only when the cause can be taken correct and effective method of clearing; then according to the degree of blockage to select the correct method of clearing, if the general debris is blocked, You can use a simple tool to solve it yourself. If it is a serious blockage, ask a professional to clear it.
Sewer Drain Pipeline Inspection Camera
Before repair, it is best to make a greeting with the upstairs and agree on a time period without water, so as to ensure that there is no water seepage during the glue application period, and that the glue can be successfully cured and cured.
1 Scrub the surrounding area with alcohol, acetone and other organic solvents to remove dust and oil.
2 If the drain pipe is a cast iron pipe. Use iron sandpaper to remove the old paint or floating rust on the surface of the iron pipe, and then scrub it again with alcohol and other solvents to remove the floating dust;
3 Dry the sand and washing area with a hair dryer and keep it in a slightly hot state.
4 Apply to a sanded, cleaned surface with a paste of pasteur, adhesive, or the like. Follow the adhesive's instructions for use.
they see black or bright lines with certain magnification and irregular edges around the lines.
If the internal structure corrosion phenomenon, when the light down, you will find a lot of lumpy, spotty surface structure.When magnified by a certain amount, it will show surface roughness.
as countries encourage the development of central city, zhengzhou current science and technology, economic development by leaps and bounds can be used to describe, nine Thai technology co., LTD. Of zhengzhou develop in such a good situation, to grasp the opportunity to intensify research and development production, in the walk road of the scientific and technological innovation, the company has successful application in nearly 10 years of accumulated 66 invention patents, utility model patents, and the company research and development team constantly inject senior talents, r&d strength growing.
According to the current market demand, the company has three categories of pipeline robots, municipal pipeline robots, petrochemical pipeline robots, special pipeline robots, these pipeline robots have good performance, \
Industrial crawling robot can check the internal pipeline is not cocrrosion, rust, iron particles, welding cracks and other quality problems.Observe their cracks. When the robot's beam hits the detected object's surface, the workers can conclude that there are cracks in the internal structure if
Industrial crawling robot can check the internal pipeline is not corrosion, rust, iron particles, welding cracks and other quality problems.
Observe their cracks. When the robot's beam hits the detected object's surface, the workers can conclude that there are cracks in the internal
structure if they see black or bright lines with certain magnification and irregular edges around the lines.
Industrial endoscope is a kind of testing instrument made according to the principle of optical imaging.
Application : petrochemical, municipal, urban construction, national defense and other fields, lightweight and portable, efficient detection.
Suitable for small pipeline inspection,smallest pipeline diameter 130mm. distance(0-200m) .
Pipeline endoscope has the characteristics of light and strong, easy to control, easy to cross obstacles and easy to disassemble.
Pipeline endoscope is generally composed of several parts, such as controller, lifting platform, camera, cable, crawler, lighting, remote control clutch, etc.
Among them, the lifting platform of remote control to adjust the height of the camera, guarantee the lens keep moderate position in pipe, the spider can turn freely through them,
and remote control clutch can release the wheels retracted the spider, handheld controller can complete lift platform, clutch, lighting, focal length, direction and speed control.
Duct endoscopy is common things in our daily life, air-conditioning pipes, gas pipes, engine and pressure vessel, etc., as the growth of the pipe using time, pipeline will gradually accumulate dirt inside, inside weld, also will become increasingly serious corrosion, in order to understand the status of these pipes, usually can use the member - duct endoscopy in the industrial endoscope for nondestructive testing.
Actual pipeline endoscope can not only detect the tap water pipeline leaking point and intercepting can also detect scale deposition in tap water pipe, can be done according to the requirements of the water company use within the pipeline monitoring, water companies in addition to the regular monitoring of water quality, timing of pipeline internal condition monitoring is also very important, duct endoscopy has photos video recording, after every test can keep photos and video data, when again detection can be compared, so the data more accurate.Therefore, water companies have been popularizing the installation and use of endoscopes in order to seek more efficient management and monitoring methods.
Endoscope pipe inspection robot camera systemTechnical Features:
1. Splash-proof,anti-corrosion,can be used in different place.
2. Forward ,backward,turn freely and adjustable speed.
3. With ambient light and adjustable illumination.
4. Lens 360°rotation and reversal without death angle.
5. Focus length is adjustable ,no limited by space size.
6. Video,photo can be set at will.
7. Video can be storage and replay.
8. The machine is easy to clean, low cost maintenance.
Endoscope camera robot wheel made of copper and stainless steel ,with skid-resistance tooth.
PortablE electronic endoscope: jiutai portable electronic endoscope is a new nondestructive testing instrument that integrates light, machine and electricity to check, detect and analyze the internal quality of the cavity.Through CMOS photoelectric coupler, high brightness LED lighting source, industrial level LCD monitor, SD card storage and other components.Jiutai handheld electronic endoscope lens small, easy to carry.Generally, it is 2mm, 2.8mm, 3.9mm, 5.5mm, 6mm and 8mm.The lines range in length from 0.5 m to 10 m.It is applied to the detection of fine parts, such as mechanical casting, automobile maintenance, aircraft maintenance, etc., which cannot be directly observed by human eyes.Through front lens imaging, the internal structure of the detection part is finally displayed through the display screen to achieve the detection purpose.
Pipeline endoscope: compared with electronic endoscope, jiutai industrial pipeline endoscope mainly focuses on long detection distance, wide detection range and strong lens care.Generally, the large lens of the endoscope can be adjusted to focus, rotated to 360° and flipped to 220°, so that no dead Angle can be detected.The detection distance can be up to 5 meters to 100 meters.Pipeline endoscope is generally used to test the header and water wall of power plant boilers and other large pipelines. The detection line of pipeline mirror is relatively hard, so the lens can be pushed directly into the tube with the help of lens diameter changing device, and the lens can be kept in the pipeline for easy detection.
Multi-function camera lenses wiht camera cover to protect the camera lens from damage.
Industrial Endoscope Inspection Robot Camera System Accessory
Crawling Robot Camera Parameter :
Camera lens Diameter
360° Infinite rotating,220°radial reversal
10 inch LCD
ZHENGZHOU JIUTAI TECHNOLOGY CO.,LTD
Zhengzhou JiuTai Technology Co.ltd is a high-tech enterprise specializing in research and development, production, sales of endoscopes in the industrial and providing customized solutions for customers , established in 2010. Our company forcuses on the international high industrial technology,up to now company apply for more than 60 patents,many technology are in the leading position in the world. Since the company established has been successful in many endoscope series, such as industrial pipe endoscope series,vessel endoscope series,car endoscope series,crawling robot series,Police endoscope series,wind power vane inspection series.Among these, Especially, GT series endoscopes and crawling robots are famous for their high technology,portable, easy operation,clear images, high efficiency and durability.it is very popular in customers at home and abroad, such as Sinopec, PetroChina, China Five Power Generation Groups etc. Related industry such as technical supervision,energy power,petrochemical,ship construction,rail traffic,food and drug,municipal administration etc.
- Company Name: ZHENGZHOU JIUTAI TECHNOLOGY CO.,LTD
- Representative: Wu Xinheng
- Product/Service: Pipe Inspection Camera , Crawling Robot Pipe Inspection , Industrial Endoscope , Borescope , Video Inspection , Portable Pipe Inspection Camera
- Capital (Million US $): 5000000RMB
- Year Established: 2010
- Total Annual Sales Volume (Million US $): US$1 Million - US$2.5 Million
- Export Percentage: 11% - 20%
- Total Annual Purchase Volume (Million US $): US$1 Million - US$2.5 Million
- No. of Production Lines: 5
- No. of R&D Staff: 5 -10 People
- No. of QC Staff: 5 -10 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): Below 1,000 square meters
- Factory Location: Room No. 1009,Xinyuan Financial Square,Jingsan Road,Zhengzhou City
- Contact Person: Mr. Wu
- Tel: 86-371-86630067
Premium Related Products